 |
|
| |
|
| |
This trap (Model 1012-CO2) combines
the proven performance of the New Standard Miniature Incandescent
Light Trap with a small precision pneumatic valve controlled
by the trap's internal photoswitch that turns on and off
the release of CO2 with the light level. |
| |
|
| |
|
Full view of the Model 1012
suitable for both mosquitoes and sandflies with
the standard collection cup assembly. Removable
collection cup is made of polypropylene and is
removable from the connecting net. Bottom of cup
has 30-mesh screen. Click
here for a larger picture. |
|
|
|
|
| |
|
|
|
| |
Photocell-Controlled CO2 Release |
| |
A
small precision pneumatic valve is controlled by the
trap's internal photoswitch and turns on and off the
release of CO2 with light level. The Model 1012-CO2 trap
comes supplied with an adjustable regulator, all lines
and connectors, and two sizes of in-line restriction
orifices that permit you to adjust the flow rate from
100 to 500 ml per minute. All you need to supply is a
beverage industry CO2 tank. |
|
|
| |
|
|
|
| |
Maximal Light Output |
| |
The Model 1012 trap emits 75% more light
than any other incandescent trap on the market.
New ABS formed rain shield and clear acrylic
body reflects and transmits light downward like a street
light as well as straight out. The new PhotoSwitch, unlike
any on the market today delivers 100% of battery voltage
to the light and motor. This means the incandescent bulb
delivers a bright and white light as designed, not a yellowish
light with most energy lost as heat (infrared).
|
| |
|
|
|
| |
Maximal air flow |
| |
The new PhotoSwitch delivering
100% of battery voltage means motor RPM's are ca. 20%
greater than other miniature light traps using PhotoSwitches.
Coupled with our low-silhouette grill, air flow in substantially
superior to other models. |
|
|
| |
|
|
|
| |
Easy To Use |
| |
The trap can be programmed into the
various modes without a magnifying glass or tweezers...
and, no jumpers to loose. The motor can be replaced
with only a screwdriver.
|
| |
|
|
|
| |
| |
| Internal programmable PhotoSwitch |
| The internal programmable photoswitch
can control any combination of motor and/or light on
and off at dusk and dawn. |
- Mode 1 Motor, light and CO2 on
at dusk, all off at dawn.
- Mode 2 Motor, light and CO2 on
at dusk, light and CO2 off at dawn, motor remains
on.
- Mode 3 Motor, light
and CO2 independent of light level, connected
traps runs.
|
|
|
| |
|
|
|
| |
Included Items |
| |
The New Standard Miniature Light Trap
with Photocell-Controlled CO2 Release Model 1012-CO2 includes: |
| |
- Trap Assembly with light, motor and fan.
- Internal Programmable PhotoSwitch
- CO2 Kit: adjustable regulator, all lines and connectors,
and two sizes of in-line restriction orifices that permit
you to adjust the flow rate from 100 to 500 ml per minute.
- Lid
- Collection Bag
- Power Cable
- Instructions
|
| |
|
|
|
| |
Requirements |
| |
- The trap draw is 0.1 Amps/hour at 6 volts.
- Requires a 6 volt, 10 amp DC battery. See the options
below or the battery and charger product
pages for more information.
|
| |
|
|
|
| |
Options |
| |
| P/N |
Description |
| 1.15 |
Photoswitch-Controlled CO2 release option. |
| 1.20 |
Killing Jar and Assembly |
| 1.30 |
Air-Actuated Gate System |
| 1.42 |
Collection Bag, Single-ring, fine mesh |
| 1.49 |
New Collection Cup, Fine Mesh |
| 1.44 |
New Collection Cup, Standard Mesh |
| 1.45 |
Collection Bag, Double Ring, Fine Mesh only |
| 1.64 |
Programmable PhotoSwitch circuit for the New Standard
Traps Models 1012 and 1212. |
| 1.50 |
4 D-cell External Battery Holder |
| 1.55 |
Trap-mounted 2 D-cell battery holders
(pair) |
| 2.30 |
Sealed, Gelled-Electrolyte Battery, 6volt, 10 Amp Hours.
(requires a charger). |
| 3.15 |
Replacement Lamp model CM-44 rated at 6.3 volts. |
| 4.10 |
Motor and Fan for Miniature Traps (6-volt) |
|
| |
|
Model 1012 Manual 167KB
