John W. Hock Company.

 

 

 

 

 

   
  The New Standard Miniature BlackLight (UV) Trap Model 1212 uses maximum airflow and an internal super-efficient transistor ballast to drive a 4 watt blue-blacklight tube for superior catch results. The internal programmable photoswitch can control any combination of motor and/or light on and off at dusk and dawn.
   
 
Full view of the Model 1212 with UV light suitable for both mosquitoes and sandflies with the standard collection cup assembly. Removable collection cup is made of polypropylene and is removable from the connecting net. Bottom of cup has 30-mesh screen.
 
Highlights
4 Watt blue-blacklight tube draws superior catch results.
Features an internal super-efficient transistor ballast
Control motor and light with programmable photoswitch.
Use with collection bag or killing jar.
Downdraft fan keeps catch in the collection bag.
Optional Air-Actuated Gate System traps catch when the fan is off.

Manual 167KB
(requires Acrobat )

 
   
  Maximal Light Output
 

The New ABS formed rain shield and clear acrylic body reflects and transmits light downward like a street light as well as straight out. The new PhotoSwitch, unlike any on the market today delivers 100% of battery voltage to the light and motor. This means that the BlackLight (UV) Ballast and light can operate from a 6 volt battery.

   
  Maximal air flow
 

The new PhotoSwitch delivering 100% of battery voltage means motor RPM's are ca. 20% greater than other miniature light traps using PhotoSwitches. Coupled with our low-silhouette grill, air flow in substantially superior to other models.

Click here for a larger close-up view without the collection bag.
   
  Easy To Use
 

The trap can be programmed into the various modes without a magnifying glass or tweezers... and, no jumpers to loose. The motor can be replaced with only a screwdriver.

   
 
Click here for a larger view of the PhotoSwitch circuit and note the easy access to the rocker switch. (smaller circuit is the UV ballast)
Internal programmable PhotoSwitch
The internal programmable photoswitch can control any combination of motor and/or light on and off at dusk and dawn.
  • Mode 1 Motor & light on at dusk, both off at dawn.
  • Mode 2 Motor & light on at dusk, light off at dawn, motor remains on.
  • Mode 3 Motor & light independent of light level, connected traps runs.
   
  Included Items
  The New Standard Miniature BlackLight (UV) Trap Model 1212 includes:
 
  • Trap assembly with motor and fan.
  • BlackLight UV tube, socket and internal ballast
  • Internal Programmable PhotoSwitch
  • Lid
  • Collection Bag
  • Power Cable
  • Instructions
   
  Requirements
 
  • The trap draw is 0.125 Amps/hour at 6 volts.
  • Requires a 6 volt, 10 amp DC battery. See the options below or the battery and charger product pages for more information.
   
  Options
 
P/N Description
1.20 Killing Jar and Assembly
1.30 Air-Actuated Gate System
1.42 Collection Bag, Single-ring, fine mesh
1.49 New Collection Cup, Fine Mesh
1.44 New Collection Cup, Standard Mesh
1.45 Collection Bag, Double Ring, Fine Mesh only
1.64 Programmable PhotoSwitch circuit for the New Standard Traps Models 1012 and 1212.
1.50 4 D-cell External Battery Holder
1.55 Trap-mounted 2 D-cell battery holders (pair)
2.30 Sealed, Gelled-Electrolyte Battery, 6volt, 10 Amp Hours. (requires a charger).
3.30 Replacement Florescent F4T5 BLB (UV) Lamp for Trap Models 812, 912, 1212 and 1312.
4.10 Motor and Fan for Miniature Traps (6-volt)
4.30 Battery Cable for Model 1012 and 1212 Traps
   
   
©2000-2008 John W. Hock Company      Tel.352.378.3209      Fax.352.372.1838     www.JohnWHock.com