John W. Hock Company.

 

 

 

 

 

CDC Miniature Light Trap Model 512
   
  The CDC Miniature Light Trap Model 512 was developed by the U.S. Centers for Disease Control to provide a reliable and portable sampling device for the collection of mosquitoes and sand flies used in arbovirus and taxonomic studies. This basic trap is capable of once-a-day tending when fitted with the optionally available PhotoSwitch and Air-Actuated Gate System.
   
 
Full view of the trap suitable for both mosquitoes and sandflies. Click here for a larger picture.
 
Highlights
Control motor and light with optional ON/OFF photoswitch.
Use with collection bag or killing jar.
Downdraft fan keeps catch in the collection bag.
Optional Air-Actuated Gate System traps catch when the fan is off.

Manual 162KB
LCS-2 Retrofit Instructions 458KB
(requires Acrobat )

 
   
  Design Characteristics
 

This battery operated trap is being used throughout the world in arbovirus and taxonomic studies. It has become a standard, battery-operated survey tool for mosquito control operations. This basic trap is capable of once-a-day tending when fitted with the optionally available PhotoSwitch (LCS-2) and Air-Actuated Gate System. When configured with a switch and gate, it is possible, with only a small battery, to collect for 3 or 4 nights with only one trip to the trap.

   
  Optional LCS-2 PhotoSwitch (P/N 1.60)
 

The LCS-2 (part number 1.60) turns a trap on at dusk and off at dawn. When used with the optional Air-Actuated Gate System, the LCS-2 conserves battery life and allows a single trip to the trap per day for consecutive days of collection.

   
  Optional Air-Accuated Gate System
 

Our patented gate system employs a butterfly check valve downwind of the motor which is opened by air from the fan and closed by counter-balancing weights. The gates and pivot shafts are made of stainless steel and are entirely maintenance free.

 
   
When used with the CDC Miniature Light Trap fitted with a PhotoSwitch, it is possible to use only a small battery to collect for 3 or 4 nights with only one trip to the trap. When a series of traps are being run, the combination of PhotoSwitch and gate system results in substantial labor savings by allowing once-a-day tending and eliminating the need for early morning and late evening work. Click here for a close up of an open and closed gate picture.
   
  Included Items
  The CDC Miniature Light Trap Model 512 includes:
 
  • Trap Assembly with light, motor and fan.
  • Lid
  • Collection Bag
  • Power Cable
  • Instructions
   
  Requirements
 
  • The trap draw is 0.2 Amps/hour at 6 volts.
  • Requires a 6 volt, 10 amp DC battery. See the options below or the battery and charger product pages for more information.
   
  Options
 
P/N Description
1.20 Killing Jar and Assembly
1.30 Air-Actuated Gate System
1.42 Collection Bag, Single-ring, fine mesh
1.49 New Collection Cup, Fine Mesh
1.44 New Collection Cup, Standard Mesh
1.45 Collection Bag, Double Ring, Fine Mesh only
1.60 PhotoSwitch LCS-2 for Trap Model 512
LCS-2 Retrofit Instructions 458KB (requires Acrobat )
1.50 4 D-cell External Battery Holder
1.55 Trap-mounted 2 D-cell battery holders (pair)
2.30 Sealed, Gelled-Electrolyte Battery, 6volt, 10 Amp Hours. (requires a charger).
3.10 Replacement Lamp model CM-47 for Trap Model 512, rated at 6.3 volts.
4.10 Motor and Fan for Miniature Traps (6-volt)
   
   
©2000-2008 John W. Hock Company      Tel.352.378.3209      Fax.352.372.1838     www.JohnWHock.com