John W. Hock Company.

 

 

 
Accessories and Options
   
  Customize a trap for your application with our many accessories and options including CO2 release, photoswitches, timers, collection cups and replacement lamps.
   
  Sandfly & Mosquito Trap Parts
 
P/N Description
1.30 Air-Actuated Gate System
Our patented gate system employs a butterfly check valve downwind of the motor which is opened by air from the fan and closed by counter-balancing weights. The gates and pivot shafts are made of stainless steel and are entirely maintenance free. Use in Trap Models 112, 512, 712, 812, 912, 1012, 1212.
Click here for an overall picture

Click here to see the gate open and closed
4.10 Motor and Fan for Miniature Traps (6-volt)
4.14 Motor and Fan for New Jersey Trap Model 1112 (110 Volt AC)
4.30 Battery Cables (please specify trap or describe)
5412 Improved Separator for the Developmental Stages, Sexes and Species of Mosquitoes.
This mechanical device is designed and manufactured for the separation of the developmental stages, sexes, and
species of mosquitoes.
Manual 150KB (requires Acrobat )
   
  CO2 Release Options
 
P/N Description
1.10 Insulated Dry-Ice Container (Igloo)
The addition of dry ice which involves CO2 gas, results in significant increases in the number and diversity of mosquitoes caught and makes the location of the trap less critical. Our Insulated Dry Ice Container is simply a modified Igloo® drink cooler with stainless steel hardware to make it easy to use with 2kg of dry ice. The insulation slows the rate of sublimation and by hanging the trap from the hook below the cooler, the CO2 is released at the correct location, right above the trap. Click here for picture.
1.15 Photoswitch-Controlled CO2 release option for Model 1012 trap.
(requires retrofit at factory of the Model 1012 trap). Note: The New Standard Miniature Light Trap with Photocell-Controlled CO2 contains this option.
CO2 Retrofit Instructions 458KB (requires Acrobat )
1.25

Granular Media CO2 Sachets
Capture of hard-to-collect species with a granular formulation that releases carbon dioxide and water vapor for 24 hours after activation. The sachets can be used with Trap Models 112, 512, 712, 812, 912, 1012, 1212. Also works with Clark's ABC trap and traps made by Hausherr and BioQuip.

1.80 PhotoSwitch-Activated CO2 Low-Pressure Shut-Off Valve.
   
  PhotoSwitches and Timers
 
P/N Description
1.60 PhotoSwitch LCS-2 for Trap Model 512
LCS-2 Retrofit Instructions 458KB (requires Acrobat )
1.64 Programmable PhotoSwitch circuit for the New Standard Traps Models 1012 and 1212.
1.68 PhotoSwitch for New Jersey Model 1112 trap, rated at 120 volts
1.90 New Jersey 24 hour timer, rated at 120 volts
1.98 New Jersey 7-day programmable timer, rated at 120 volts.
4012 Universal Programmable Timer for 12 VDC operation.
Universal Programmable Switch Model 4012 is a timer designed to allow almost compete flexibility in scheduling the operation of 12 VDC electrical equipment. The clock is a completely solid-state quartz-based timer that can be programmed with up to eight pairs of on/off events scheduled for each day of the week.
   
  Replacement Lamps
 
P/N Description
3.10 Replacement Lamp model CM-47 for Trap Model 512, rated at 6.3 volts.
3.15 Replacement Lamp model CM-44 for Trap Model 1012, rated at 6.3 volts.
3.20 Replacement Lamp model CM-503 for Trap Model 2112, rated at 5.2 volts.
3.30 Replacement Florescent F4T5 BLB (UV) Lamp for Trap Models 812, 912, 1212 and 1312.
3.40 Replacement Rough-Service Lamp for Trap Model 1112, rated at 25 watts, 110 volts AC.
   
  Collection Bags and Cups
 
P/N Description
1.20 Killing Jar and Assembly
1.42 Collection Bag, Single-ring, fine mesh
1.49 New Collection Cup, Fine Mesh
1.44 New Collection Cup, Standard Mesh
1.45 Collection Bag, Double Ring, Fine Mesh only
1.70 Spare bottle for use with products Model 1.20, Model 1112, and 1512.
1.94 Fine Mesh Replacement Cone Assembly for New Jersey Model 1112 trap.
80.00 Sun Resistant Entomological Polyester Fabrics
Fine mesh "No seeum". Ordered by the yard and 72" wide. Contact us for colors.
   
  Flight Trap Parts
 
P/N Description
5.10 Dry/Wet Collection Heads (pair) for flight traps Models 3012 and 3212.
5.20 Alcohol Collection Heads (pair) for flight traps Models 3012 and 3212.
5.30 Dry/Wet Collection Heads (pair) for Townes Trap Model 3412.
3412.5 Adjustable aluminum tent pole for use with the Townes Trap Model 3412.
   
  Aspirator Parts
 
P/N Description
1.00 6 Regular Mesh Stainless Steel Collection Cups for use with the Model 1412 Aspirator.
1.01 6 Fine Mesh Stainless Steel Collection Cups for use with the Model 1412 Aspirator.
1.02 Collection Net for use with the Model 1612 Aspirator.
4.18 Suction motor and housing for Model 1412 Aspirator.
   
  Aerosol Collection Slides
 
P/N Description click here for Droplet Samplers
6.25 Magnesium-Oxide-coated. Slides not reusable. Slides measure ca. 6 by 75-mm, 2.5-mm thick. Box of 25 slides.
   
   
©2000-2008 John W. Hock Company      Tel.352.378.3209      Fax.352.372.1838     www.JohnWHock.com