Products

Universal-Voltage Blacklight LED Compact Light Trap

The Universal-Voltage Blacklight LED Compact Light Trap Model 2014 features ….insert super-awesome info here…

New Standard Miniature Incandescent Light Trap


Full view of the Model 1012 suitable for both mosquitoes and sandflies with the standard collection cup assembly. Removable collection cup is made of polypropylene and is removable from the connecting net. Bottom of cup has 30-mesh screen.

Highlights

  • Get 100% incandescent light output for the brightest light possible.
  • Control motor and light with programmable photoswitch.
  • Use with collection bag or killing jar.
  • Downdraft fan keeps catch in the collection bag.
  • Optional Air-Actuated Gate System traps catch when the fan is off.
  • Registered as a National Stock Number.
  • Available in CO2 release and Blacklight (UV) models.
  • Model 1012 Manual

Maximal Light Output

The Model 1012 trap emits 75% more light than any other incandescent trap on the market. New ABS formed rainshield and clear acrylic body reflects and transmits light downward like a street light as well as straight out. The new PhotoSwitch, unlike any on the market today delivers 100% of battery voltage to the light and motor. This means the incandescent bulb delivers a bright and white light as designed, not a yellowish light with most energy lost as heat (infrared).

Model 1012 Without Collection Bag

Close-up view of Model 1012 without the collection bag.

Maximal Air Flow

The new PhotoSwitch delivering 100% of battery voltage means motor RPM’s are ca. 20% greater than other miniature light traps using PhotoSwitches. Coupled with our low-silhouette grill, air flow in substantially superior to other models.

Easy To Use

The trap can be programmed into the various modes without a magnifying glass or tweezers… and, no jumpers to loose. The motor can be replaced with only a screwdriver.

Model 1012 PhotoSwitch

Close-up view of the model 1012 photoswitch circuit. Note the easy access to the rocker switch.

Internal Programmable PhotoSwitch

The internal programmable photoswitch can control any combination of motor and/or light on and off at dusk and dawn.

  • Mode 1 Motor & light on at dusk, both off at dawn.
  • Mode 2 Motor & light on at dusk, light off at dawn, motor remains on.
  • Mode 3 Motor & light independent of light level, connected traps runs.

Included Items

The New Standard Miniature Incandescent Light Trap Model 1012 includes:

  • Trap Assembly with light, motor and fan.
  • Internal Programmable PhotoSwitch
  • Lid
  • Collection bag
  • Power Cable
  • instructions

Requirements

  • The trap draw is 0.1 Amps/hour at 6 volts.
  • Requires a 6 volt, 12 amp DC battery. See the options below or the batteries and chargers product page for more information.

Options

P/N Description
1.15 Photoswitch-Controlled CO2 release option (requires retrofit at factory of the Model 1012 trap). Note: The New Standard Miniature Light Trap with Photocell-Controlled CO2 contains this option.CO2 Retrofit Instructions

1.20

 

 

 

Killing Jar and Assembly
1.30 Air-Actuated Gate System
1.42 Collection Bag, Single-ring, fine mesh
1.49 New Collection Cup, Fine Mesh
1.44 New Collection Cup, Standard Mesh
1.45 Collection Bag, Double Ring, Fine Mesh only
1.64 Programmable PhotoSwitch circuit for the New Standard Traps Models 1012 and 1212.
1.50 4 D-cell External Battery Holder
2.30 Sealed, Gelled-Electrolyte Battery, 6volt, 12 Amp Hours (requires a charger).
3.15 Replacement Lamp model CM-44 for Trap Model 1012, rated at 6.3 volts.
4.10 Motor and Fan for Miniature Traps (6-volt)